Category: Handlebars, Headsets and Stems

Easton Haven 35 Carbon Handlebar Red 2016 Review

August 9, 2018 Gooze No Comments Handlebars, Headsets and Stems

Easton Haven 35 Carbon Handlebar Red 2016

    This fits your .
  • Make sure this fits by entering your model number.

  • UD Matte Carbon Finish
  • Weight: 188g
  • Carbon construction

the easton haven 35 carbon handlebar red 2016 is fully adapted to mountain bikes. it has been designed to offer the highest performance in any condition, combining high quality materials and innovative technologies will make it the best choice for the most demanding cyclists and ends. this handlebar is the fruit of the experience of easton in the manufacture of the highest quality components, for example has been made use of technology tapper wall that allows you to create a structure of the handlebar with unique properties. it is possible to increase the strength, lightness and durability from multiple narrowings in the same tube thanks to a process modulated by computer-generated. it is manufactured with the highest quality carbon, has a diameter of 35 mm, a weight of 188 gr. the main measures concerning its length is 750 mm and has two different heights for (20 or 40 mm) to ensure you maximum comfort and fit your style of driving. the choice between these 2 options will depend on if you prefer a more aggressive position, in this case the serious choice handlebar with a lift of 20 mm, or if in the search for a more upright and comfortable position, is not afraid to sacrifice a bit of sportiness. features: -double height mountain bike handlebar. -for the most demanding riders. -technology tapper wall, increases strength, lightness and durability. -material: carbon ec90. -diameter: 35 mm -length: 750 mm. -2 possible heights of 20 mm and 40 mm. -backspace: 9th. -elevation: 5th. -weight: 188/205 gr.

Easton EC70 SL3 Handlebar Review

August 9, 2018 Gooze No Comments Handlebars, Headsets and Stems

Easton EC70 SL3 Handlebar

  • UD Matte Carbon Finish
  • Weight: 230g
  • Carbon construction

This handlebar’s shallow drop and compact reach allow instant access to the controls from a wide range of hand positions and this bar accommodates every major brand of shifter. With the addition of Taper Wall technology and Intelligent Flexibility this handlebar is wicked strong, ride-tuned and weighs just 230 grams.

Roland Sands Design 1″ Black-OPS 12″ Vintage Handlebar 0173-1838-TBP Review

August 9, 2018 Gooze No Comments Handlebars, Headsets and Stems

Roland Sands Design 1

    This fits your .
  • Make sure this fits by entering your model number.

  • Features:

• Original gusseted ape and its flowing radius tubes and riding position are unmatched in style, design and quality• The stance will give you the aggressive yet comfortable riding position you are looking for• End caps make it extremely easy to run internal wiring• If quality and originality are important to you, then look no further• 1″ diameter to accept stock or aftermarket hand controls• 30″ Wide• 12″ Rise• 6-1/2″ Center Width• 4″ Pullback• Slotted and drilled for internal wiring• Knurling for risers at 3-1/2″ on-center• Stylish multi-hole drilled corner gusset offers strength and rigidity• Black Ops, Roland Sands Design’s newest finish option for handlebars has a textured black handlebar with gloss black end caps

Ergon GP3 Bicycle Handlebar Grip Review

August 9, 2018 Gooze No Comments Handlebars, Headsets and Stems

Ergon GP3 Bicycle Handlebar Grip

  • Version of the GP1 with a GFK bar end for alternate hand position and extra torque
  • Supportive wing for optimal pressure distribution
  • Grip and bar end angle can be adjusted separately
  • available in small and large with the size being the circumference between thumb and forefinger and six versions depending on shifters
  • Bar end acts as a lock on clamp for fast and secure installation

The GR2 features a composite 3-finger bar end with anti-slip rubber inserts. Its size and shape are ideal for small to medium sized hands (Size S: 6.5 – 8.5) as well as for medium to larger sized hands (Size L: 8.5 – 10.5). The bar end and the grip platform can be independently adjusted for the correct support angle and provides the perfect fit for your individual riding style.

RaceFace SIXC 35 20mm Rise Carbon Handlebar Review

August 9, 2018 Gooze No Comments Handlebars, Headsets and Stems

RaceFace SIXC 35 20mm Rise Carbon Handlebar

    This fits your .
  • Make sure this fits by entering your model number.

  • Material: carbon fiber
  • Diameter: 35mm
  • Rise: 20mm
  • Sweep: 8 rearward, 5 upward
  • Width: 800mm

There were years where we questioned the validity and longevity of 35mm handlebars, but those days have come and gone. 35mm bars have become the new norm, with the stiffness afforded that provides maximum control of your machine, and wider, lighter bars becoming easier to access. Race Face, of course, isn’t new to the game, as they’ve been pushing the envelope to build beefier components for years. They are back again with another iteration of the Race Face SIXC 35 20mm Rise Carbon Handlebar, allowing us to eagerly tackle the mountain with lightweight stiffness that reminds us of why we swapped our bars in the first place. Race Face begins the construction with unidirectional carbon fiber, allowing standards to be set high for durability without adding excessive weight. Counterintuitively, the wider dimension of the bar at the stem clamp allows for lighter weight despite having a stiffer interface. Because 35mm bars are so much stronger than 31. 8mm bars, Race Face’s engineers are able to go back and remove large amounts of excess material, tapering it down on the ends without risking reduced torsional rigidity that might cause bending, twisting, and flex that we don’t want from a bar. Collectively this comes together to make a lighter, stiffer, and stronger handlebar, which inarguably means a better handlebar. With the extra strength, stretching to wider standards becomes possible, and even though the bar comes in a super-wide 800mm length, with its tapered cut makes the bar both lighter and wider than the 31. 8mm version. Falling in beteen the 35-mm DH rise, and eager 10-mm rise of the XC oriented bar, the 20-mm rise of this model allows for the perfect balance of control and shred-ready strength.

Wild 1 1-1/4″ Black 8″ Chopper T-Bar Handlebar WO562B Review

August 9, 2018 Gooze No Comments Handlebars, Headsets and Stems

Wild 1 1-1/4

    This fits your .
  • Make sure this fits by entering your model number.

  • 1-1/4 inch thick diameter
  • 1/2 inch – 13 tpi bolt size
  • Risers are 3-1/2 inch center to center
  • Pre-drilled for internal wiring
  • Works with early and late model stock controls and grips, most custom controls and custom grips

› See more product details

Color:Black

• These handlebars are 25% thicker than stock bars• Designed with fluid bends and precise angles to provide maximum comfort and control• Pre-drilled for internal wiring• Will work with stock controls for 1″ bars• All bars are notched for Throttle-by-Wire applications• Black semi-gloss finish to match stock controls

Zipp SL Speed Stem Review

August 9, 2018 Gooze No Comments Handlebars, Headsets and Stems

Zipp SL Speed Stem

  • Lightweight yet stiff
  • 102g
  • Carbon construction

SLSpeed’s unidirectional carbon body contains no embedded metal. Rearward-facing bolts thread directly into the faceplate to minimize weight, while the bottom edge of the clamp is designed to contact the body of the stem in order to reduce flexing.Zipp Speed Weaponry serves a select group of elite companies and athletes, globally located and committed to bicycle & wheelchair competition. Zipp meets customer’s needs for the highest performance, superlative quality components through innovative design and manufacturing utilizing the best material and technology available.Our company is built on mutual respect, delivery on promise and fastidious attention to manufacturing details. We do this by providing exceptional customer service and aggressive marketing, supporting distribution through dedicated dealers, distributors, OE’s and direct sales. Market share growth is achieved through continuous product and process improvement, adding new products, additional categories and expanding the distribution channels.

Profile Designs Airstryke V2 Aluminum Clip-on Aerobars Review

August 8, 2018 Gooze No Comments Handlebars, Headsets and Stems

Profile Designs Airstryke V2 Aluminum Clip-on Aerobars

    This fits your .
  • Make sure this fits by entering your model number.

  • Material: aluminum
  • Diameter: 31.8mm (26.0mm with included shims)
  • Reach: -90, -75, -60, -45mm
  • Width: [center to center] 322mm, 355mm
  • Armrest: Ergo

We can identify two primary problems with installing clip-onbars on our road bikes. First, when fitting them on standard road drop bars fora triathlon or time trial, we usually have to install a straight seatpost orslam the saddle forward to compensate for the extensions being further forward.Second, the armrests usually cover the tops of the bar, leading to the dreadedhands on the pad technique on steeper climbs. The Airstryke V2 Aluminum Clip-onAerobars take care of the second issue by including Profile Design’s patentedFlip-Up brackets, which use springs to keep the armrests elevated while you’renot resting on them. This preserves access to your drop bar’s top or the entirebase bar without sacrificing the benefits of clip-on extensions when it’s timeto get aero. As for the cockpit adjustments, we recommend investing in a secondsaddle/seatpost combo if it isn’t a proprietary design and you’ll have a quickas an easy dedicated setup for triathlons, time trials, and weekend omniums.

Paughco H20S Handlebar (11/4″ Chromerome Ht s Ht Bar 8″”) Review

August 8, 2018 Gooze No Comments Handlebars, Headsets and Stems

Paughco H20S Handlebar (11/4

    This fits your .
  • Make sure this fits by entering your model number.

  • H-shaped T-bars made from 11/4″-diameter tubing swaged down to 1″
  • Integral .675″ diameter hollow mounting studs permit routing of internal wiring down through bars and studs to exit below triple tree
  • Include set of large polymer handlebar bushings and washers
  • Not for Throttle By Wire applications
  • Made in the U.S.A

› See more product details

H-shaped T-bars made from 11/4″-diameter tubing swaged down to 1″ Integral .675″ diameter hollow mounting studs permit routing of internal wiring down through bars and studs to exit below triple tree Include set of large polymer handlebar bushings and washers.